Free construction SVG

Construction traffic cone SVG

Construction traffic cone, as a solid black shape — Construction traffic cone. The preview is the SVG file itself.

A traffic cone on its square base with two reflective bands. The bands are open slots that stop just short of the edges, so the cone stays in one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	76 × 100 mm (2.98 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	478 mm at this size
Narrowest part	2.8 mm at this size
Nodes	24 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,533 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.76 × 1 in (19 × 25 mm)	0.71 mm	121 mm	120	Fine detail: vinyl and paper only, weed with care
1.51 × 2 in (38 × 51 mm)	1.4 mm	243 mm	35	Vinyl, card and thin sheet
2.27 × 3 in (58 × 76 mm)	2.1 mm	364 mm	12	Vinyl, card and thin sheet
3.03 × 4 in (77 × 102 mm)	2.8 mm	486 mm	6	Vinyl, card and thin sheet
4.54 × 6 in (115 × 152 mm)	4.3 mm	728 mm	2	Any material, including 3 mm wood and acrylic
6.06 × 8 in (154 × 203 mm)	5.7 mm	971 mm	1	Any material, including 3 mm wood and acrylic
9.08 × 12 in (231 × 305 mm)	8.5 mm	1,457 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More construction SVG files

← Construction hard hat from the front All 16 construction designs Construction excavator →