Free construction SVG

Construction hard hat from the front SVG

Construction hard hat from the front, as a solid black shape
Construction hard hat from the front. The preview is the SVG file itself.

The hard hat seen head on, with the rib running down the middle and the brim dipping at the peak. Each side of the shell is blank, with room for a name or a number.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 63 mm (3.94 × 2.47 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length486 mm at this size
Narrowest part5.5 mm at this size
Nodes75 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,285 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.63 in (25 × 16 mm)1.4 mm123 mm140Vinyl, card and thin sheet
2 × 1.26 in (51 × 32 mm)2.8 mm247 mm40Vinyl, card and thin sheet
3 × 1.88 in (76 × 48 mm)4.2 mm370 mm15Any material, including 3 mm wood and acrylic
4 × 2.51 in (102 × 64 mm)5.6 mm494 mm8Any material, including 3 mm wood and acrylic
6 × 3.77 in (152 × 96 mm)8.4 mm741 mm3Any material, including 3 mm wood and acrylic
8 × 5.02 in (203 × 128 mm)11 mm988 mm2Any material, including 3 mm wood and acrylic
12 × 7.54 in (305 × 191 mm)17 mm1,481 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More construction SVG files

← Construction hard hat All 16 construction designs Construction traffic cone →