Free branch SVG

Branch wreath, open at the top SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Branch wreath, open at the top, as a solid black shape
Branch wreath, open at the top. The preview is the SVG file itself.

Two leafy stems that cross at the foot and curve up to leave a gap at the top: twenty-five leaves a side around an open middle about 60 mm across at 100 mm.

What is in the file

Size100 × 97 mm (3.94 × 3.8 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut24: 1 outer edge and 23 cut-outs
Cut length1,068 mm at this size
Narrowest part1.3 mm at this size
Nodes400 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,935 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.97 in (25 × 25 mm)0.33 mm271 mm100Too fine for most machines
2 × 1.93 in (51 × 49 mm)0.66 mm543 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.9 in (76 × 74 mm)0.99 mm814 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.86 in (102 × 98 mm)1.3 mm1,085 mm6Vinyl, card and thin sheet
6 × 5.8 in (152 × 147 mm)2 mm1,628 mm2Vinyl, card and thin sheet
8 × 7.73 in (203 × 196 mm)2.6 mm2,170 mm1Vinyl, card and thin sheet
12 × 11.59 in (305 × 294 mm)4 mm3,255 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More branch SVG files

← Curved branch with paired leaves All 16 branches Branch outline with open leaves →