Free branch SVG

Curved branch with paired leaves SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Curved branch with paired leaves, as a solid black shape
Curved branch with paired leaves. The preview is the SVG file itself.

A single stem that rises from the left edge and arches over to the right, with ten pairs of leaves that get a little smaller towards the tip. A frame for a name set underneath.

What is in the file

Size100 × 31 mm (3.94 × 1.22 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length457 mm at this size
Narrowest part2 mm at this size
Nodes156 curve and line segments

Measured from the file. PNG: 2,000 × 675 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.31 in (25 × 8 mm)0.51 mm116 mm230Fine detail: vinyl and paper only, weed with care
2 × 0.62 in (51 × 16 mm)1 mm232 mm70Vinyl, card and thin sheet
3 × 0.93 in (76 × 24 mm)1.5 mm348 mm30Vinyl, card and thin sheet
4 × 1.24 in (102 × 32 mm)2 mm464 mm16Vinyl, card and thin sheet
6 × 1.87 in (152 × 47 mm)3 mm696 mm5Any material, including 3 mm wood and acrylic
8 × 2.49 in (203 × 63 mm)4.1 mm929 mm4Any material, including 3 mm wood and acrylic
12 × 3.73 in (305 × 95 mm)6.1 mm1,393 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More branch SVG files

← Branch with a hanging beehive All 16 branches Branch wreath, open at the top →