Free branch SVG

Branch with a bird’s nest and eggs SVG

Branch with a bird’s nest and eggs, as a solid black shape — Branch with a bird’s nest and eggs. The preview is the SVG file itself.

A woven nest of sticks sitting in the fork of a branch with three eggs showing over the rim, and a few leaves on the limbs around it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 33 mm (3.94 × 1.31 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	572 mm at this size
Narrowest part	1.9 mm at this size
Nodes	148 curve and line segments

Measured from the file. PNG: 2,000 × 719 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.33 in (25 × 8 mm)	0.48 mm	145 mm	220	Too fine for most machines
2 × 0.67 in (51 × 17 mm)	0.97 mm	291 mm	70	Fine detail: vinyl and paper only, weed with care
3 × 1 in (76 × 25 mm)	1.4 mm	436 mm	30	Vinyl, card and thin sheet
4 × 1.34 in (102 × 34 mm)	1.9 mm	581 mm	14	Vinyl, card and thin sheet
6 × 2 in (152 × 51 mm)	2.9 mm	872 mm	5	Vinyl, card and thin sheet
8 × 2.67 in (203 × 68 mm)	3.9 mm	1,162 mm	4	Any material, including 3 mm wood and acrylic
12 × 4.01 in (305 × 102 mm)	5.8 mm	1,743 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More branch SVG files

← Blossom branch with buds All 16 branches Pine branch with two cones →