Free branch SVG

Fir branch with a hanging bauble SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fir branch with a hanging bauble, as a solid black shape
Fir branch with a hanging bauble. The preview is the SVG file itself.

A flat spray of fir with three pairs of side shoots, short needles down both sides of each, and a round bauble with a star cut in it hanging from the main limb.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size100 × 59 mm (3.94 × 2.33 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut17: 1 outer edge and 16 cut-outs
Cut length1,149 mm at this size
Narrowest part1.1 mm at this size
Nodes519 curve and line segments
Also found asChristmas tree branch SVG

Measured from the file. PNG: 2,000 × 1,217 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.59 in (25 × 15 mm)0.28 mm292 mm150Too fine for most machines
2 × 1.19 in (51 × 30 mm)0.56 mm584 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.78 in (76 × 45 mm)0.84 mm876 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.37 in (102 × 60 mm)1.1 mm1,167 mm8Vinyl, card and thin sheet
6 × 3.56 in (152 × 90 mm)1.7 mm1,751 mm3Vinyl, card and thin sheet
8 × 4.74 in (203 × 120 mm)2.2 mm2,335 mm2Vinyl, card and thin sheet
12 × 7.12 in (305 × 181 mm)3.4 mm3,502 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More branch SVG files

← Pine branch with two cones All 16 branches Christmas branch hung with ornaments →