Free branch SVG

Branch outline with open leaves SVG

Branch outline with open leaves, drawn as a line
Branch outline with open leaves. The preview is the SVG file itself.

A slender branch with four side limbs and fifteen large leaves drawn as outlines, each with its midrib. For colouring, foil, engraving and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 50 mm (3.94 × 1.97 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut32: 1 outer edge and 31 cut-outs
Cut length1,019 mm at this size
Narrowest part1.8 mm at this size
Nodes230 curve and line segments

Measured from the file. PNG: 2,000 × 1,040 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.5 in (25 × 13 mm)0.46 mm259 mm170Too fine for most machines
2 × 1 in (51 × 25 mm)0.91 mm518 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.5 in (76 × 38 mm)1.4 mm776 mm21Vinyl, card and thin sheet
4 × 2 in (102 × 51 mm)1.8 mm1,035 mm10Vinyl, card and thin sheet
6 × 3.01 in (152 × 76 mm)2.7 mm1,553 mm3Vinyl, card and thin sheet
8 × 4.01 in (203 × 102 mm)3.7 mm2,071 mm2Any material, including 3 mm wood and acrylic
12 × 6.01 in (305 × 153 mm)5.5 mm3,106 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More branch SVG files

← Branch wreath, open at the top All 16 branches Layered blossom branch in four colours →