Free branch SVG

Layered blossom branch in four colours SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Layered blossom branch in four colours, in layered colours
Layered blossom branch in four colours. The preview is the SVG file itself.

Four layers: the brown wood with its buds, three green leaves, pale pink blossoms and a deep pink centre for each flower. Stack them in that order.

What is in the file

Size100 × 41 mm (3.94 × 1.6 in), scales to any size
Pieces17 separate pieces
Outlines to cut27: 17 outer edges and 10 cut-outs
Cut length893 mm at this size
Narrowest part2.2 mm at this size
Nodes236 curve and line segments
Layers4: wood, leaves, petals and centres

Measured from the file. PNG: 2,000 × 860 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.41 in (25 × 10 mm)0.56 mm227 mm200Fine detail: vinyl and paper only, weed with care
2 × 0.81 in (51 × 21 mm)1.1 mm454 mm60Vinyl, card and thin sheet
3 × 1.22 in (76 × 31 mm)1.7 mm680 mm24Vinyl, card and thin sheet
4 × 1.63 in (102 × 41 mm)2.2 mm907 mm12Vinyl, card and thin sheet
6 × 2.44 in (152 × 62 mm)3.4 mm1,361 mm4Any material, including 3 mm wood and acrylic
8 × 3.26 in (203 × 83 mm)4.5 mm1,815 mm3Any material, including 3 mm wood and acrylic
12 × 4.88 in (305 × 124 mm)6.7 mm2,722 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More branch SVG files

← Branch outline with open leaves All 16 branches Bare tree branch →