Free boxing glove SVG

Single boxing glove with laces SVG

Single boxing glove with laces, as a solid black shape — Single boxing glove with laces. The preview is the SVG file itself.

One glove standing upright: a round mitt, the thumb lying against its side and a cuff with two bands and crossed laces. A curved shine line on the mitt keeps it from looking flat.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	70 × 100 mm (2.74 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	725 mm at this size
Narrowest part	2.5 mm at this size
Nodes	82 curve and line segments

Measured from the file. PNG: 1,417 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.7 × 1 in (18 × 25 mm)	0.64 mm	184 mm	130	Fine detail: vinyl and paper only, weed with care
1.39 × 2 in (35 × 51 mm)	1.3 mm	368 mm	35	Vinyl, card and thin sheet
2.09 × 3 in (53 × 76 mm)	1.9 mm	552 mm	15	Vinyl, card and thin sheet
2.79 × 4 in (71 × 102 mm)	2.5 mm	737 mm	8	Vinyl, card and thin sheet
4.18 × 6 in (106 × 152 mm)	3.8 mm	1,105 mm	2	Any material, including 3 mm wood and acrylic
5.58 × 8 in (142 × 203 mm)	5.1 mm	1,473 mm	2	Any material, including 3 mm wood and acrylic
8.36 × 12 in (212 × 305 mm)	7.6 mm	2,210 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More boxing glove SVG files

← Boxing championship belt All 13 boxing gloves Pair of boxing gloves →