Free boxing glove SVG

Boxing championship belt SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boxing championship belt, as a solid black shape
Boxing championship belt. The preview is the SVG file itself.

A title belt laid flat: a scalloped round plate with a crown and a star, a smaller starred plate on each side and a strap with three studs at each end. Symmetrical and in one piece.

What is in the file

Size100 × 46 mm (3.94 × 1.83 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut29: 1 outer edge and 28 cut-outs
Cut length957 mm at this size
Narrowest part1 mm at this size
Nodes239 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 969 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.46 in (25 × 12 mm)0.25 mm243 mm180Too fine for most machines
2 × 0.93 in (51 × 24 mm)0.51 mm486 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.39 in (76 × 35 mm)0.76 mm729 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.86 in (102 × 47 mm)1 mm972 mm10Vinyl, card and thin sheet
6 × 2.78 in (152 × 71 mm)1.5 mm1,458 mm4Vinyl, card and thin sheet
8 × 3.71 in (203 × 94 mm)2 mm1,945 mm3Vinyl, card and thin sheet
12 × 5.57 in (305 × 141 mm)3 mm2,917 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More boxing glove SVG files

← Crossed boxing gloves with a banner All 13 boxing gloves Single boxing glove with laces →