Free boxing glove SVG

Boxing glove punch with a burst SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boxing glove punch with a burst, as a solid black shape
Boxing glove punch with a burst. The preview is the SVG file itself.

A glove flying in from the left with three speed streaks behind it, punching through a spiky comic-book burst drawn as a ring. One welded piece, for gym posters, shirts and party invitations.

What is in the file

Size100 × 65 mm (3.94 × 2.55 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length863 mm at this size
Narrowest part1 mm at this size
Nodes164 curve and line segments

Measured from the file. PNG: 2,000 × 1,321 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.65 in (25 × 16 mm)0.25 mm219 mm140Too fine for most machines
2 × 1.29 in (51 × 33 mm)0.51 mm438 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.94 in (76 × 49 mm)0.76 mm658 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.59 in (102 × 66 mm)1 mm877 mm8Vinyl, card and thin sheet
6 × 3.88 in (152 × 99 mm)1.5 mm1,315 mm2Vinyl, card and thin sheet
8 × 5.18 in (203 × 131 mm)2 mm1,754 mm2Vinyl, card and thin sheet
12 × 7.76 in (305 × 197 mm)3 mm2,630 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More boxing glove SVG files

← Boxing glove outline All 13 boxing gloves Boxing glove with a heart →