Free boxing glove SVG

Boxing glove outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boxing glove outline, drawn as a line
Boxing glove outline. The preview is the SVG file itself.

A single glove as a line drawing, tilted as if ready to jab: the mitt, the thumb, two cuff bands and crossed laces between two lace rows. For colouring pages, foil and engraving.

What is in the file

Size68 × 100 mm (2.67 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length928 mm at this size
Narrowest part2 mm at this size
Nodes115 curve and line segments

Measured from the file. PNG: 1,383 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.68 × 1 in (17 × 25 mm)0.51 mm236 mm130Fine detail: vinyl and paper only, weed with care
1.36 × 2 in (34 × 51 mm)1 mm471 mm35Vinyl, card and thin sheet
2.04 × 3 in (52 × 76 mm)1.5 mm707 mm15Vinyl, card and thin sheet
2.72 × 4 in (69 × 102 mm)2 mm943 mm8Vinyl, card and thin sheet
4.07 × 6 in (103 × 152 mm)3 mm1,414 mm2Any material, including 3 mm wood and acrylic
5.43 × 8 in (138 × 203 mm)4.1 mm1,886 mm2Any material, including 3 mm wood and acrylic
8.15 × 12 in (207 × 305 mm)6.1 mm2,829 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More boxing glove SVG files

← Crossed boxing gloves All 13 boxing gloves Boxing glove punch with a burst →