Free boxing glove SVG

Crossed boxing gloves SVG

Crossed boxing gloves, as a solid black shape
Crossed boxing gloves. The preview is the SVG file itself.

Two gloves crossed at the wrist with their mitts apart at the top, like a club badge. One glove lies over the other, shown by a fine gap that stops short of the edges.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 63 mm (3.94 × 2.49 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length821 mm at this size
Narrowest part1.8 mm at this size
Nodes135 curve and line segments

Measured from the file. PNG: 2,000 × 1,294 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.63 in (25 × 16 mm)0.46 mm209 mm140Too fine for most machines
2 × 1.27 in (51 × 32 mm)0.91 mm417 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.9 in (76 × 48 mm)1.4 mm626 mm15Vinyl, card and thin sheet
4 × 2.53 in (102 × 64 mm)1.8 mm834 mm8Vinyl, card and thin sheet
6 × 3.8 in (152 × 96 mm)2.7 mm1,251 mm3Vinyl, card and thin sheet
8 × 5.06 in (203 × 129 mm)3.7 mm1,668 mm2Any material, including 3 mm wood and acrylic
12 × 7.6 in (305 × 193 mm)5.5 mm2,502 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More boxing glove SVG files

← Hanging boxing gloves All 13 boxing gloves Boxing glove outline →