Free Bows Before Bros SVG

Bows Before Bros outline lettering SVG

Bows Before Bros outline lettering, drawn as a line
Bows Before Bros outline lettering. The preview is the SVG file itself.

“Bows Before Bros” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 35 mm (3.94 × 1.37 in), scales to any size
Pieces17 separate pieces
Outlines to cut46: 17 outer edges and 29 cut-outs
Cut length1,162 mm at this size
Narrowest part0.9 mm at this size
Nodes438 curve and line segments

Measured from the file. PNG: 2,000 × 744 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.35 in (25 × 9 mm)0.23 mm295 mm220Too fine for most machines
2 × 0.69 in (51 × 18 mm)0.46 mm590 mm65Too fine for most machines
3 × 1.04 in (76 × 26 mm)0.69 mm885 mm27Fine detail: vinyl and paper only, weed with care
4 × 1.39 in (102 × 35 mm)0.91 mm1,181 mm14Fine detail: vinyl and paper only, weed with care
6 × 2.08 in (152 × 53 mm)1.4 mm1,771 mm5Vinyl, card and thin sheet
8 × 2.78 in (203 × 71 mm)1.8 mm2,361 mm4Vinyl, card and thin sheet
12 × 4.16 in (305 × 106 mm)2.7 mm3,542 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Bows Before Bros SVG files

← Bows Before Bros with hearts All 12 Bows Before Bros designs Bows Before Bros stencil plate →