Free Bows Before Bros SVG

Bows Before Bros in Kaushan Script SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bows Before Bros in Kaushan Script, as a solid black shape
Bows Before Bros in Kaushan Script. The preview is the SVG file itself.

“Bows Before Bros” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

What is in the file

Size100 × 45 mm (3.94 × 1.78 in), scales to any size
Pieces14 separate pieces
Outlines to cut27: 14 outer edges and 13 cut-outs
Cut length893 mm at this size
Narrowest part0.7 mm at this size
Nodes390 curve and line segments

Measured from the file. PNG: 2,000 × 948 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.45 in (25 × 12 mm)0.18 mm227 mm180Too fine for most machines
2 × 0.91 in (51 × 23 mm)0.36 mm454 mm55Too fine for most machines
3 × 1.36 in (76 × 35 mm)0.53 mm680 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.81 in (102 × 46 mm)0.71 mm907 mm12Fine detail: vinyl and paper only, weed with care
6 × 2.72 in (152 × 69 mm)1.1 mm1,361 mm4Vinyl, card and thin sheet
8 × 3.62 in (203 × 92 mm)1.4 mm1,815 mm3Vinyl, card and thin sheet
12 × 5.44 in (305 × 138 mm)2.1 mm2,722 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Bows Before Bros SVG files

← Bows Before Bros in Lobster All 13 Bows Before Bros designs Bows Before Bros in Lilita One →