Free Bows Before Bros SVG

Bows Before Bros in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bows Before Bros in Lobster, as a solid black shape
Bows Before Bros in Lobster. The preview is the SVG file itself.

“Bows Before Bros” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 53 mm (3.94 × 2.09 in), scales to any size
Pieces10 separate pieces
Outlines to cut18: 10 outer edges and 8 cut-outs
Cut length935 mm at this size
Narrowest part0.7 mm at this size
Nodes309 curve and line segments

Measured from the file. PNG: 2,000 × 1,096 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.53 in (25 × 13 mm)0.18 mm237 mm160Too fine for most machines
2 × 1.06 in (51 × 27 mm)0.36 mm475 mm45Too fine for most machines
3 × 1.59 in (76 × 40 mm)0.53 mm712 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.12 in (102 × 54 mm)0.71 mm950 mm10Fine detail: vinyl and paper only, weed with care
6 × 3.18 in (152 × 81 mm)1.1 mm1,425 mm3Vinyl, card and thin sheet
8 × 4.24 in (203 × 108 mm)1.4 mm1,900 mm2Vinyl, card and thin sheet
12 × 6.36 in (305 × 162 mm)2.1 mm2,850 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Bows Before Bros SVG files

← Bows Before Bros in Pacifico All 13 Bows Before Bros designs Bows Before Bros in Kaushan Script →