Free Bows Before Bros SVG

Bows Before Bros in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bows Before Bros in Lilita One, as a solid black shape
Bows Before Bros in Lilita One. The preview is the SVG file itself.

“Bows Before Bros” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 37 mm (3.94 × 1.45 in), scales to any size
Pieces14 separate pieces
Outlines to cut25: 14 outer edges and 11 cut-outs
Cut length685 mm at this size
Narrowest part2.3 mm at this size
Nodes253 curve and line segments

Measured from the file. PNG: 2,000 × 785 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.37 in (25 × 9 mm)0.58 mm174 mm210Fine detail: vinyl and paper only, weed with care
2 × 0.74 in (51 × 19 mm)1.2 mm348 mm65Vinyl, card and thin sheet
3 × 1.1 in (76 × 28 mm)1.8 mm522 mm27Vinyl, card and thin sheet
4 × 1.47 in (102 × 37 mm)2.3 mm696 mm14Vinyl, card and thin sheet
6 × 2.21 in (152 × 56 mm)3.5 mm1,044 mm5Any material, including 3 mm wood and acrylic
8 × 2.94 in (203 × 75 mm)4.7 mm1,392 mm3Any material, including 3 mm wood and acrylic
12 × 4.42 in (305 × 112 mm)7 mm2,088 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Bows Before Bros SVG files

← Bows Before Bros in Kaushan Script All 13 Bows Before Bros designs Bows Before Bros in Alfa Slab One →