Free Bows Before Bros SVG

Bows Before Bros in Alfa Slab One SVG

Bows Before Bros in Alfa Slab One, as a solid black shape
Bows Before Bros in Alfa Slab One. The preview is the SVG file itself.

“Bows Before Bros” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 32 mm (3.94 × 1.26 in), scales to any size
Pieces14 separate pieces
Outlines to cut25: 14 outer edges and 11 cut-outs
Cut length694 mm at this size
Narrowest part2.4 mm at this size
Nodes393 curve and line segments

Measured from the file. PNG: 2,000 × 694 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.32 in (25 × 8 mm)0.61 mm176 mm230Fine detail: vinyl and paper only, weed with care
2 × 0.64 in (51 × 16 mm)1.2 mm353 mm70Vinyl, card and thin sheet
3 × 0.96 in (76 × 24 mm)1.8 mm529 mm30Vinyl, card and thin sheet
4 × 1.28 in (102 × 33 mm)2.4 mm705 mm16Vinyl, card and thin sheet
6 × 1.93 in (152 × 49 mm)3.7 mm1,058 mm5Any material, including 3 mm wood and acrylic
8 × 2.57 in (203 × 65 mm)4.9 mm1,410 mm4Any material, including 3 mm wood and acrylic
12 × 3.85 in (305 × 98 mm)7.3 mm2,115 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Bows Before Bros SVG files

← Bows Before Bros in Lilita One All 12 Bows Before Bros designs Bows Before Bros in Amatic SC →