Free Bows Before Bros SVG

Bows Before Bros in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bows Before Bros in Pacifico, as a solid black shape
Bows Before Bros in Pacifico. The preview is the SVG file itself.

“Bows Before Bros” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 53 mm (3.94 × 2.07 in), scales to any size
Pieces8 separate pieces
Outlines to cut14: 8 outer edges and 6 cut-outs
Cut length829 mm at this size
Narrowest part1.4 mm at this size
Nodes352 curve and line segments

Measured from the file. PNG: 2,000 × 1,088 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.53 in (25 × 13 mm)0.36 mm211 mm160Too fine for most machines
2 × 1.05 in (51 × 27 mm)0.71 mm421 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.58 in (76 × 40 mm)1.1 mm632 mm18Vinyl, card and thin sheet
4 × 2.1 in (102 × 53 mm)1.4 mm842 mm10Vinyl, card and thin sheet
6 × 3.16 in (152 × 80 mm)2.1 mm1,263 mm3Vinyl, card and thin sheet
8 × 4.21 in (203 × 107 mm)2.8 mm1,685 mm2Vinyl, card and thin sheet
12 × 6.31 in (305 × 160 mm)4.3 mm2,527 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Bows Before Bros SVG files

← Bows Before Bros with a heart All 13 Bows Before Bros designs Bows Before Bros in Lobster →