Heart divider with curled ends SVG
A small heart in the middle of a fine line whose ends wind up into curls, with a dot each side of the heart. For wedding programmes, vows and love letters.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 17 mm (3.94 × 0.68 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 1 outline |
| Cut length | 322 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 64 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 410 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.17 in (25 × 4 mm) | 0.61 mm | 82 mm | 320 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.35 in (51 × 9 mm) | 1.2 mm | 164 mm | 110 | Vinyl, card and thin sheet |
| 3 × 0.52 in (76 × 13 mm) | 1.8 mm | 245 mm | 48 | Vinyl, card and thin sheet |
| 4 × 0.69 in (102 × 18 mm) | 2.4 mm | 327 mm | 26 | Vinyl, card and thin sheet |
| 6 × 1.04 in (152 × 26 mm) | 3.7 mm | 491 mm | 9 | Any material, including 3 mm wood and acrylic |
| 8 × 1.38 in (203 × 35 mm) | 4.9 mm | 654 mm | 7 | Any material, including 3 mm wood and acrylic |
| 12 × 2.08 in (305 × 53 mm) | 7.3 mm | 981 mm | 5 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Laurel divider 
Celtic braid border 
Decorative scroll border 
Corner border 
Double line border with beads 
Scallop border 
Lace border 
Greek key border 