Free border SVG

Double line border with beads SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Double line border with beads, as a solid black shape
Double line border with beads. The preview is the SVG file itself.

A bold line over a fine one, with eight small beads between them that tie the two together. A plain, formal rule for certificates, menus and labels.

What is in the file

Size100 × 11 mm (3.94 × 0.45 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length443 mm at this size
Narrowest part2 mm at this size
Nodes40 curve and line segments
SymmetryMirror
Also found asSimple border SVG

Measured from the file. PNG: 2,000 × 296 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.11 in (25 × 3 mm)0.51 mm113 mm380Fine detail: vinyl and paper only, weed with care
2 × 0.23 in (51 × 6 mm)1 mm225 mm140Vinyl, card and thin sheet
3 × 0.34 in (76 × 9 mm)1.5 mm338 mm66Vinyl, card and thin sheet
4 × 0.46 in (102 × 12 mm)2 mm450 mm36Vinyl, card and thin sheet
6 × 0.68 in (152 × 17 mm)3 mm675 mm13Any material, including 3 mm wood and acrylic
8 × 0.91 in (203 × 23 mm)4.1 mm900 mm10Any material, including 3 mm wood and acrylic
12 × 1.37 in (305 × 35 mm)6.1 mm1,350 mm7Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More border SVG files

← Corner border All 16 borders Scallop border →