Free border SVG

Scallop border SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Scallop border, as a solid black shape
Scallop border. The preview is the SVG file itself.

Eight half-round scallops hanging from a straight bar, each with a small round eyelet. The edge of a doily, a shelf liner or a bunting strip, and copies join end to end.

What is in the file

Size100 × 11 mm (3.94 × 0.43 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length345 mm at this size
Narrowest part2.4 mm at this size
Nodes76 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 285 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.11 in (25 × 3 mm)0.61 mm88 mm390Fine detail: vinyl and paper only, weed with care
2 × 0.22 in (51 × 5 mm)1.2 mm175 mm145Vinyl, card and thin sheet
3 × 0.32 in (76 × 8 mm)1.8 mm263 mm69Vinyl, card and thin sheet
4 × 0.43 in (102 × 11 mm)2.4 mm351 mm38Vinyl, card and thin sheet
6 × 0.65 in (152 × 16 mm)3.7 mm526 mm14Any material, including 3 mm wood and acrylic
8 × 0.86 in (203 × 22 mm)4.9 mm701 mm11Any material, including 3 mm wood and acrylic
12 × 1.3 in (305 × 33 mm)7.3 mm1,052 mm8Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More border SVG files

← Double line border with beads All 16 borders Lace border →