Free border SVG

Lace border SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Lace border, as a solid black shape
Lace border. The preview is the SVG file itself.

A band with a row of eyelets above five deep arches, each arch edged with five small loops and pierced with a teardrop and two dots. A lace edging for cards and invitations.

What is in the file

Size100 × 22 mm (3.94 × 0.86 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut30: 1 outer edge and 29 cut-outs
Cut length627 mm at this size
Narrowest part1.9 mm at this size
Nodes166 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 498 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.22 in (25 × 6 mm)0.48 mm159 mm290Too fine for most machines
2 × 0.44 in (51 × 11 mm)0.97 mm319 mm95Fine detail: vinyl and paper only, weed with care
3 × 0.66 in (76 × 17 mm)1.4 mm478 mm42Vinyl, card and thin sheet
4 × 0.88 in (102 × 22 mm)1.9 mm637 mm22Vinyl, card and thin sheet
6 × 1.31 in (152 × 33 mm)2.9 mm956 mm8Vinyl, card and thin sheet
8 × 1.75 in (203 × 45 mm)3.9 mm1,274 mm6Any material, including 3 mm wood and acrylic
12 × 2.63 in (305 × 67 mm)5.8 mm1,911 mm4Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More border SVG files

← Scallop border All 16 borders Greek key border →