Free border SVG

Divider with a diamond SVG

Divider with a diamond, as a solid black shape — Divider with a diamond. The preview is the SVG file itself.

An open diamond at the centre with two smaller ones each side, on a line that tapers to a point at both ends. The classic ornament between a heading and its text.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 15 mm (3.94 × 0.59 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	240 mm at this size
Narrowest part	2.2 mm at this size
Nodes	38 curve and line segments
Symmetry	2-fold rotation and mirror

Measured from the file. PNG: 2,000 × 365 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.15 in (25 × 4 mm)	0.56 mm	61 mm	340	Fine detail: vinyl and paper only, weed with care
2 × 0.3 in (51 × 8 mm)	1.1 mm	122 mm	120	Vinyl, card and thin sheet
3 × 0.45 in (76 × 11 mm)	1.7 mm	183 mm	54	Vinyl, card and thin sheet
4 × 0.6 in (102 × 15 mm)	2.2 mm	244 mm	30	Vinyl, card and thin sheet
6 × 0.9 in (152 × 23 mm)	3.4 mm	366 mm	11	Any material, including 3 mm wood and acrylic
8 × 1.2 in (203 × 30 mm)	4.5 mm	488 mm	8	Any material, including 3 mm wood and acrylic
12 × 1.8 in (305 × 46 mm)	6.7 mm	732 mm	6	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More border SVG files

← Arrow divider All 16 borders Heart divider with curled ends →