Free beer bottle SVG

Beer bottle growler with a handle SVG

Beer bottle growler with a handle, as a solid black shape
Beer bottle growler with a handle. The preview is the SVG file itself.

A wide refill jug with a ridged screw cap, a finger loop at the neck and a large round blank label about 35 mm across, ready for a name or a brew date.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size56 × 100 mm (2.19 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length486 mm at this size
Narrowest part2.8 mm at this size
Nodes66 curve and line segments

Measured from the file. PNG: 1,148 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.56 × 1 in (14 × 25 mm)0.71 mm123 mm160Fine detail: vinyl and paper only, weed with care
1.11 × 2 in (28 × 51 mm)1.4 mm247 mm45Vinyl, card and thin sheet
1.67 × 3 in (42 × 76 mm)2.1 mm370 mm18Vinyl, card and thin sheet
2.23 × 4 in (57 × 102 mm)2.8 mm494 mm10Vinyl, card and thin sheet
3.34 × 6 in (85 × 152 mm)4.3 mm741 mm3Any material, including 3 mm wood and acrylic
4.46 × 8 in (113 × 203 mm)5.7 mm988 mm2Any material, including 3 mm wood and acrylic
6.68 × 12 in (170 × 305 mm)8.5 mm1,481 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More beer bottle SVG files

← Swing-top beer bottle All 15 beer bottles Beer bottle silhouette →