Free beer bottle SVG

Two crossed beer bottles SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Two crossed beer bottles, as a solid black shape
Two crossed beer bottles. The preview is the SVG file itself.

Two capped longnecks crossed in an X, one over the other across a slim gap, each with its blank oval label. A badge for a home bar, a brew club or a stag weekend.

What is in the file

Size84 × 100 mm (3.29 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length765 mm at this size
Narrowest part1 mm at this size
Nodes116 curve and line segments

Measured from the file. PNG: 1,685 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.84 × 1 in (21 × 25 mm)0.25 mm194 mm110Too fine for most machines
1.67 × 2 in (42 × 51 mm)0.51 mm389 mm30Fine detail: vinyl and paper only, weed with care
2.51 × 3 in (64 × 76 mm)0.76 mm583 mm12Fine detail: vinyl and paper only, weed with care
3.34 × 4 in (85 × 102 mm)1 mm777 mm6Vinyl, card and thin sheet
5.02 × 6 in (127 × 152 mm)1.5 mm1,166 mm2Vinyl, card and thin sheet
6.69 × 8 in (170 × 203 mm)2 mm1,554 mm1Vinyl, card and thin sheet
10.03 × 12 in (255 × 305 mm)3 mm2,332 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More beer bottle SVG files

← Beer bottle outline All 15 beer bottles Beer bottle with its cap popping off →