Free beer bottle SVG

Beer bottle outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Beer bottle outline, drawn as a line
Beer bottle outline. The preview is the SVG file itself.

A longneck drawn as a line about 2.5 mm wide, with a solid cap, a band on the neck and two lines across the body marking a blank label. For colouring pages, foil and pen plotting.

What is in the file

Size43 × 100 mm (1.68 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length536 mm at this size
Narrowest part1.6 mm at this size
Nodes67 curve and line segments

Measured from the file. PNG: 896 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.43 × 1 in (11 × 25 mm)0.41 mm136 mm190Too fine for most machines
0.85 × 2 in (22 × 51 mm)0.81 mm272 mm55Fine detail: vinyl and paper only, weed with care
1.28 × 3 in (32 × 76 mm)1.2 mm408 mm24Vinyl, card and thin sheet
1.7 × 4 in (43 × 102 mm)1.6 mm545 mm12Vinyl, card and thin sheet
2.56 × 6 in (65 × 152 mm)2.4 mm817 mm4Vinyl, card and thin sheet
3.41 × 8 in (87 × 203 mm)3.3 mm1,089 mm3Any material, including 3 mm wood and acrylic
5.11 × 12 in (130 × 305 mm)4.9 mm1,634 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More beer bottle SVG files

← Beer bottle silhouette All 15 beer bottles Two crossed beer bottles →