Free beer bottle SVG

Beer bottle cap at an angle SVG

Beer bottle cap at an angle, as a solid black shape
Beer bottle cap at an angle. The preview is the SVG file itself.

A crown cap seen from just above: the blank top as an oval, a cut line along its front edge and the toothed skirt showing below. For coasters, bar signs and bottle cap collectors.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 56 mm (3.94 × 2.21 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length454 mm at this size
Narrowest part3 mm at this size
Nodes159 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,158 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.56 in (25 × 14 mm)0.76 mm115 mm160Fine detail: vinyl and paper only, weed with care
2 × 1.12 in (51 × 29 mm)1.5 mm231 mm45Vinyl, card and thin sheet
3 × 1.69 in (76 × 43 mm)2.3 mm346 mm18Vinyl, card and thin sheet
4 × 2.25 in (102 × 57 mm)3 mm461 mm8Any material, including 3 mm wood and acrylic
6 × 3.37 in (152 × 86 mm)4.6 mm692 mm3Any material, including 3 mm wood and acrylic
8 × 4.5 in (203 × 114 mm)6.1 mm923 mm2Any material, including 3 mm wood and acrylic
12 × 6.74 in (305 × 171 mm)9.1 mm1,384 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More beer bottle SVG files

← Beer bottle with its cap popping off All 15 beer bottles Beer bottle opener →