Free beer bottle SVG

Beer bottle opener SVG

Beer bottle opener, as a solid black shape
Beer bottle opener. The preview is the SVG file itself.

A flat bar opener: a round head with a toothed mouth to catch the cap, a long handle with a groove down it and a hole to hang it by.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size86 × 100 mm (3.37 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length478 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes41 curve and line segments

Measured from the file. PNG: 1,721 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.86 × 1 in (22 × 25 mm)Over 1.5 mm121 mm110Vinyl, card and thin sheet
1.71 × 2 in (43 × 51 mm)Over 3 mm243 mm30Any material, including 3 mm wood and acrylic
2.57 × 3 in (65 × 76 mm)Over 4.6 mm364 mm12Any material, including 3 mm wood and acrylic
3.42 × 4 in (87 × 102 mm)Over 6.1 mm486 mm6Any material, including 3 mm wood and acrylic
5.13 × 6 in (130 × 152 mm)Over 9.1 mm728 mm2Any material, including 3 mm wood and acrylic
6.84 × 8 in (174 × 203 mm)Over 12 mm971 mm1Any material, including 3 mm wood and acrylic
10.26 × 12 in (261 × 305 mm)Over 18 mm1,457 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More beer bottle SVG files

← Beer bottle cap at an angle All 15 beer bottles Six pack of beer bottles →