Free Be Mine SVG

Be Mine in Pacifico SVG

Be Mine in Pacifico, as a solid black shape — Be Mine in Pacifico. The preview is the SVG file itself.

“Be Mine” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 23 mm (3.94 × 0.91 in), scales to any size
Pieces	4 separate pieces
Outlines to cut	6: 4 outer edges and 2 cut-outs
Cut length	559 mm at this size
Narrowest part	1.9 mm at this size
Nodes	225 curve and line segments

Measured from the file. PNG: 2,000 × 523 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.23 in (25 × 6 mm)	0.48 mm	142 mm	280	Too fine for most machines
2 × 0.46 in (51 × 12 mm)	0.97 mm	284 mm	90	Fine detail: vinyl and paper only, weed with care
3 × 0.7 in (76 × 18 mm)	1.4 mm	426 mm	39	Vinyl, card and thin sheet
4 × 0.93 in (102 × 24 mm)	1.9 mm	568 mm	20	Vinyl, card and thin sheet
6 × 1.39 in (152 × 35 mm)	2.9 mm	852 mm	7	Vinyl, card and thin sheet
8 × 1.86 in (203 × 47 mm)	3.9 mm	1,136 mm	5	Any material, including 3 mm wood and acrylic
12 × 2.78 in (305 × 71 mm)	5.8 mm	1,704 mm	4	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Be Mine SVG files

← Be Mine with a drop shadow All 12 Be Mine designs Be Mine in Lobster →