Free Be Mine SVG

Be Mine with a swash underline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Be Mine with a swash underline, as a solid black shape
Be Mine with a swash underline. The preview is the SVG file itself.

“Be Mine” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.

What is in the file

Size100 × 30 mm (3.94 × 1.17 in), scales to any size
Pieces5 separate pieces
Outlines to cut7: 5 outer edges and 2 cut-outs
Cut length754 mm at this size
Narrowest part1.9 mm at this size
Nodes218 curve and line segments

Measured from the file. PNG: 2,000 × 650 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.3 in (25 × 8 mm)0.48 mm192 mm240Too fine for most machines
2 × 0.6 in (51 × 15 mm)0.97 mm383 mm75Fine detail: vinyl and paper only, weed with care
3 × 0.89 in (76 × 23 mm)1.4 mm575 mm33Vinyl, card and thin sheet
4 × 1.19 in (102 × 30 mm)1.9 mm766 mm16Vinyl, card and thin sheet
6 × 1.79 in (152 × 45 mm)2.9 mm1,149 mm6Vinyl, card and thin sheet
8 × 2.38 in (203 × 61 mm)3.9 mm1,532 mm4Any material, including 3 mm wood and acrylic
12 × 3.58 in (305 × 91 mm)5.8 mm2,298 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Be Mine SVG files

← Be Mine in block capitals All 13 Be Mine designs Be Mine with hearts →