Free Be Mine SVG

Be Mine stencil plate SVG

Be Mine stencil plate, as a solid black shape — Be Mine stencil plate. The preview is the SVG file itself.

A rounded plate with “BE MINE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 36 mm (3.94 × 1.42 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	816 mm at this size
Narrowest part	1.7 mm at this size
Nodes	88 curve and line segments

Measured from the file. PNG: 2,000 × 771 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.36 in (25 × 9 mm)	0.43 mm	207 mm	210	Too fine for most machines
2 × 0.72 in (51 × 18 mm)	0.86 mm	415 mm	65	Fine detail: vinyl and paper only, weed with care
3 × 1.08 in (76 × 28 mm)	1.3 mm	622 mm	27	Vinyl, card and thin sheet
4 × 1.44 in (102 × 37 mm)	1.7 mm	829 mm	14	Vinyl, card and thin sheet
6 × 2.17 in (152 × 55 mm)	2.6 mm	1,244 mm	5	Vinyl, card and thin sheet
8 × 2.89 in (203 × 73 mm)	3.5 mm	1,658 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.33 in (305 × 110 mm)	5.2 mm	2,487 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Be Mine SVG files

← Be Mine outline lettering All 12 Be Mine designs Be Mine with a drop shadow →