Free Be Mine SVG

Be Mine in Kaushan Script SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Be Mine in Kaushan Script, as a solid black shape
Be Mine in Kaushan Script. The preview is the SVG file itself.

“Be Mine” set in Kaushan Script, a lively brush script. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

What is in the file

Size100 × 24 mm (3.94 × 0.95 in), scales to any size
Pieces7 separate pieces
Outlines to cut11: 7 outer edges and 4 cut-outs
Cut length619 mm at this size
Narrowest part1.1 mm at this size
Nodes213 curve and line segments

Measured from the file. PNG: 2,000 × 542 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.24 in (25 × 6 mm)0.28 mm157 mm270Too fine for most machines
2 × 0.48 in (51 × 12 mm)0.56 mm314 mm85Fine detail: vinyl and paper only, weed with care
3 × 0.73 in (76 × 18 mm)0.84 mm472 mm39Fine detail: vinyl and paper only, weed with care
4 × 0.97 in (102 × 25 mm)1.1 mm629 mm20Vinyl, card and thin sheet
6 × 1.45 in (152 × 37 mm)1.7 mm943 mm7Vinyl, card and thin sheet
8 × 1.94 in (203 × 49 mm)2.2 mm1,258 mm5Vinyl, card and thin sheet
12 × 2.9 in (305 × 74 mm)3.4 mm1,887 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Be Mine SVG files

← Be Mine in Lobster All 13 Be Mine designs Be Mine in Lilita One →