Free Be Mine SVG

Be Mine in Amatic SC SVG

Be Mine in Amatic SC, as a solid black shape — Be Mine in Amatic SC. The preview is the SVG file itself.

“Be Mine” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 39 mm (3.94 × 1.54 in), scales to any size
Pieces	6 separate pieces
Outlines to cut	8: 6 outer edges and 2 cut-outs
Cut length	861 mm at this size
Narrowest part	2.2 mm at this size
Nodes	272 curve and line segments

Measured from the file. PNG: 2,000 × 827 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.39 in (25 × 10 mm)	0.56 mm	219 mm	200	Fine detail: vinyl and paper only, weed with care
2 × 0.78 in (51 × 20 mm)	1.1 mm	437 mm	60	Vinyl, card and thin sheet
3 × 1.17 in (76 × 30 mm)	1.7 mm	656 mm	24	Vinyl, card and thin sheet
4 × 1.56 in (102 × 40 mm)	2.2 mm	875 mm	12	Vinyl, card and thin sheet
6 × 2.34 in (152 × 59 mm)	3.4 mm	1,312 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.12 in (203 × 79 mm)	4.5 mm	1,750 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.68 in (305 × 119 mm)	6.7 mm	2,624 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Be Mine SVG files

← Be Mine in Alfa Slab One All 12 Be Mine designs Be Mine in block capitals →