Free Be Mine SVG

Be Mine with hearts SVG

Be Mine with hearts, as a solid black shape — Be Mine with hearts. The preview is the SVG file itself.

“Be Mine” in Lobster with a row of three hearts above the words and three below, the middle one larger. The hearts are loose pieces, spaced to the width of the lettering.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 54 mm (3.94 × 2.14 in), scales to any size
Pieces	11 separate pieces
Outlines to cut	13: 11 outer edges and 2 cut-outs
Cut length	815 mm at this size
Narrowest part	1.4 mm at this size
Nodes	248 curve and line segments

Measured from the file. PNG: 2,000 × 1,121 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.54 in (25 × 14 mm)	0.36 mm	207 mm	160	Too fine for most machines
2 × 1.09 in (51 × 28 mm)	0.71 mm	414 mm	45	Fine detail: vinyl and paper only, weed with care
3 × 1.63 in (76 × 41 mm)	1.1 mm	621 mm	18	Vinyl, card and thin sheet
4 × 2.17 in (102 × 55 mm)	1.4 mm	828 mm	10	Vinyl, card and thin sheet
6 × 3.26 in (152 × 83 mm)	2.1 mm	1,242 mm	3	Vinyl, card and thin sheet
8 × 4.34 in (203 × 110 mm)	2.8 mm	1,656 mm	2	Vinyl, card and thin sheet
12 × 6.52 in (305 × 166 mm)	4.3 mm	2,484 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Be Mine SVG files

← Be Mine with a swash underline All 12 Be Mine designs Be Mine outline lettering →