Free Be Mine SVG

Be Mine in Alfa Slab One SVG

Be Mine in Alfa Slab One, as a solid black shape — Be Mine in Alfa Slab One. The preview is the SVG file itself.

“Be Mine” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 18 mm (3.94 × 0.7 in), scales to any size
Pieces	7 separate pieces
Outlines to cut	11: 7 outer edges and 4 cut-outs
Cut length	499 mm at this size
Narrowest part	2.4 mm at this size
Nodes	221 curve and line segments

Measured from the file. PNG: 2,000 × 421 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.18 in (25 × 5 mm)	0.61 mm	127 mm	320	Fine detail: vinyl and paper only, weed with care
2 × 0.36 in (51 × 9 mm)	1.2 mm	253 mm	105	Vinyl, card and thin sheet
3 × 0.54 in (76 × 14 mm)	1.8 mm	380 mm	48	Vinyl, card and thin sheet
4 × 0.72 in (102 × 18 mm)	2.4 mm	507 mm	26	Vinyl, card and thin sheet
6 × 1.07 in (152 × 27 mm)	3.7 mm	760 mm	9	Any material, including 3 mm wood and acrylic
8 × 1.43 in (203 × 36 mm)	4.9 mm	1,014 mm	7	Any material, including 3 mm wood and acrylic
12 × 2.15 in (305 × 55 mm)	7.3 mm	1,521 mm	5	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Be Mine SVG files

← Be Mine in Lilita One All 12 Be Mine designs Be Mine in Amatic SC →