Free Baby on Board SVG

Baby on Board stencil plate SVG

Baby on Board stencil plate, as a solid black shape — Baby on Board stencil plate. The preview is the SVG file itself.

A rounded plate with “BABY ON BOARD” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 73 mm (3.94 × 2.85 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	12: 1 outer edge and 11 cut-outs
Cut length	1,415 mm at this size
Narrowest part	1.7 mm at this size
Nodes	306 curve and line segments

Measured from the file. PNG: 2,000 × 1,471 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.73 in (25 × 18 mm)	0.43 mm	359 mm	130	Too fine for most machines
2 × 1.45 in (51 × 37 mm)	0.86 mm	719 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.17 in (76 × 55 mm)	1.3 mm	1,078 mm	15	Vinyl, card and thin sheet
4 × 2.9 in (102 × 74 mm)	1.7 mm	1,438 mm	6	Vinyl, card and thin sheet
6 × 4.35 in (152 × 110 mm)	2.6 mm	2,156 mm	2	Vinyl, card and thin sheet
8 × 5.8 in (203 × 147 mm)	3.5 mm	2,875 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.7 in (305 × 221 mm)	5.2 mm	4,313 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Baby on Board SVG files

← Baby on Board outline lettering All 12 Baby on Board designs Baby on Board with a drop shadow →