Baby on Board with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Baby on Board” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 68 mm (3.94 × 2.66 in), scales to any size |
|---|---|
| Pieces | 8 separate pieces |
| Outlines to cut | 26: 8 outer edges and 18 cut-outs |
| Cut length | 1,563 mm at this size |
| Narrowest part | 3.5 mm at this size |
| Nodes | 483 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,375 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.68 in (25 × 17 mm) | 0.89 mm | 397 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.35 in (51 × 34 mm) | 1.8 mm | 794 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.03 in (76 × 51 mm) | 2.7 mm | 1,191 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.7 in (102 × 69 mm) | 3.6 mm | 1,588 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 4.05 in (152 × 103 mm) | 5.3 mm | 2,382 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.4 in (203 × 137 mm) | 7.1 mm | 3,176 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.1 in (305 × 206 mm) | 11 mm | 4,764 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Baby on Board SVG files
-
Baby on Board with a pair of baby feet Solid · 21 pieces
-
Baby on Board in Pacifico Solid · 5 pieces
-
Baby on Board in Lobster Solid · 7 pieces
-
Baby on Board in Kaushan Script Solid · 11 pieces
-
Baby on Board in Lilita One Solid · 11 pieces
-
Baby on Board in Alfa Slab One Solid · 11 pieces
-
Baby on Board in Amatic SC Solid · 11 pieces
-
Baby on Board in block capitals Solid · 11 pieces
← Baby on Board stencil plate All 13 Baby on Board designs Baby on Board with a pair of baby feet →