Free Baby on Board SVG

Baby on Board in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Baby on Board in Lilita One, as a solid black shape
Baby on Board in Lilita One. The preview is the SVG file itself.

“Baby on Board” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 48 mm (3.94 × 1.87 in), scales to any size
Pieces11 separate pieces
Outlines to cut21: 11 outer edges and 10 cut-outs
Cut length719 mm at this size
Narrowest part2.7 mm at this size
Nodes197 curve and line segments

Measured from the file. PNG: 2,000 × 992 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.48 in (25 × 12 mm)0.69 mm183 mm180Fine detail: vinyl and paper only, weed with care
2 × 0.95 in (51 × 24 mm)1.4 mm365 mm50Vinyl, card and thin sheet
3 × 1.43 in (76 × 36 mm)2.1 mm548 mm21Vinyl, card and thin sheet
4 × 1.9 in (102 × 48 mm)2.7 mm731 mm10Vinyl, card and thin sheet
6 × 2.86 in (152 × 73 mm)4.1 mm1,096 mm3Any material, including 3 mm wood and acrylic
8 × 3.81 in (203 × 97 mm)5.5 mm1,461 mm3Any material, including 3 mm wood and acrylic
12 × 5.71 in (305 × 145 mm)8.2 mm2,192 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Baby on Board SVG files

← Baby on Board in Kaushan Script All 13 Baby on Board designs Baby on Board in Alfa Slab One →