Free Baby on Board SVG

Baby on Board outline lettering SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Baby on Board outline lettering, drawn as a line
Baby on Board outline lettering. The preview is the SVG file itself.

“Baby on Board” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

What is in the file

Size100 × 45 mm (3.94 × 1.78 in), scales to any size
Pieces13 separate pieces
Outlines to cut42: 13 outer edges and 29 cut-outs
Cut length1,218 mm at this size
Narrowest part1.3 mm at this size
Nodes427 curve and line segments

Measured from the file. PNG: 2,000 × 946 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.45 in (25 × 11 mm)0.33 mm309 mm180Too fine for most machines
2 × 0.9 in (51 × 23 mm)0.66 mm619 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.36 in (76 × 34 mm)0.99 mm928 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.81 in (102 × 46 mm)1.3 mm1,237 mm12Vinyl, card and thin sheet
6 × 2.71 in (152 × 69 mm)2 mm1,856 mm4Vinyl, card and thin sheet
8 × 3.62 in (203 × 92 mm)2.6 mm2,475 mm3Vinyl, card and thin sheet
12 × 5.42 in (305 × 138 mm)4 mm3,712 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Baby on Board SVG files

← Baby on Board with stars All 13 Baby on Board designs Baby on Board stencil plate →