Free Baby on Board SVG

Baby on Board in Alfa Slab One SVG

Baby on Board in Alfa Slab One, as a solid black shape — Baby on Board in Alfa Slab One. The preview is the SVG file itself.

“Baby on Board” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 42 mm (3.94 × 1.64 in), scales to any size
Pieces	11 separate pieces
Outlines to cut	21: 11 outer edges and 10 cut-outs
Cut length	739 mm at this size
Narrowest part	2.1 mm at this size
Nodes	350 curve and line segments

Measured from the file. PNG: 2,000 × 877 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.42 in (25 × 11 mm)	0.53 mm	188 mm	190	Fine detail: vinyl and paper only, weed with care
2 × 0.83 in (51 × 21 mm)	1.1 mm	375 mm	55	Vinyl, card and thin sheet
3 × 1.25 in (76 × 32 mm)	1.6 mm	563 mm	24	Vinyl, card and thin sheet
4 × 1.66 in (102 × 42 mm)	2.1 mm	751 mm	12	Vinyl, card and thin sheet
6 × 2.5 in (152 × 63 mm)	3.2 mm	1,126 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.33 in (203 × 85 mm)	4.3 mm	1,502 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.99 in (305 × 127 mm)	6.4 mm	2,252 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Baby on Board SVG files

← Baby on Board in Lilita One All 12 Baby on Board designs Baby on Board in Amatic SC →