Free Baby on Board SVG

Baby on Board in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Baby on Board in Lobster, as a solid black shape
Baby on Board in Lobster. The preview is the SVG file itself.

“Baby on Board” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 59 mm (3.94 × 2.32 in), scales to any size
Pieces7 separate pieces
Outlines to cut14: 7 outer edges and 7 cut-outs
Cut length948 mm at this size
Narrowest part1.1 mm at this size
Nodes258 curve and line segments

Measured from the file. PNG: 2,000 × 1,210 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.59 in (25 × 15 mm)0.28 mm241 mm150Too fine for most machines
2 × 1.18 in (51 × 30 mm)0.56 mm482 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.77 in (76 × 45 mm)0.84 mm722 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.36 in (102 × 60 mm)1.1 mm963 mm8Vinyl, card and thin sheet
6 × 3.53 in (152 × 90 mm)1.7 mm1,445 mm3Vinyl, card and thin sheet
8 × 4.71 in (203 × 120 mm)2.2 mm1,926 mm2Vinyl, card and thin sheet
12 × 7.07 in (305 × 180 mm)3.4 mm2,890 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Baby on Board SVG files

← Baby on Board in Pacifico All 13 Baby on Board designs Baby on Board in Kaushan Script →