Free American flag SVG

Distressed American flag SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Distressed American flag, as a solid black shape
Distressed American flag. The preview is the SVG file itself.

The one-colour flag worn as if screen-printed long ago: flakes of ink missing in patches, dry streaks along the stripes, chipped edges and a few stars rubbed into their neighbours. No part is thinner than 1.4 mm.

What is in the file

Size100 × 53 mm (3.94 × 2.07 in), scales to any size
Pieces24 separate pieces
Outlines to cut74: 24 outer edges and 50 cut-outs
Cut length2,232 mm at this size
Narrowest part1 mm at this size
Nodes1,395 curve and line segments

Measured from the file. PNG: 2,000 × 1,088 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.53 in (25 × 13 mm)0.25 mm567 mm160Too fine for most machines
2 × 1.05 in (51 × 27 mm)0.51 mm1,134 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.58 in (76 × 40 mm)0.76 mm1,701 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.1 in (102 × 53 mm)1 mm2,268 mm10Vinyl, card and thin sheet
6 × 3.16 in (152 × 80 mm)1.5 mm3,402 mm3Vinyl, card and thin sheet
8 × 4.21 in (203 × 107 mm)2 mm4,535 mm2Vinyl, card and thin sheet
12 × 6.31 in (305 × 160 mm)3 mm6,803 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More American flag SVG files

← American flag waving on a pole All 14 American flags Tattered American flag →