Free American flag SVG

American flag sunglasses SVG

American flag sunglasses. The preview is the SVG file itself.

A pair of square sunglasses with stars cut out of one lens and stripes across the other, joined by the bridge into one piece. A Fourth of July design for shirts, cups and party signs.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 34 mm (3.94 × 1.33 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	19: 1 outer edge and 18 cut-outs
Cut length	955 mm at this size
Narrowest part	1.7 mm at this size
Nodes	208 curve and line segments

Measured from the file. PNG: 2,000 × 729 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.34 in (25 × 9 mm)	0.43 mm	243 mm	220	Too fine for most machines
2 × 0.68 in (51 × 17 mm)	0.86 mm	485 mm	65	Fine detail: vinyl and paper only, weed with care
3 × 1.02 in (76 × 26 mm)	1.3 mm	728 mm	30	Vinyl, card and thin sheet
4 × 1.36 in (102 × 34 mm)	1.7 mm	970 mm	14	Vinyl, card and thin sheet
6 × 2.03 in (152 × 52 mm)	2.6 mm	1,455 mm	5	Vinyl, card and thin sheet
8 × 2.71 in (203 × 69 mm)	3.5 mm	1,941 mm	4	Any material, including 3 mm wood and acrylic
12 × 4.07 in (305 × 103 mm)	5.2 mm	2,911 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More American flag SVG files

← Betsy Ross American flag with thirteen stars All 14 American flags Layered American flag in red, white and blue →