Free American flag SVG

American flag waving on a pole SVG

American flag waving on a pole, as a solid black shape
American flag waving on a pole. The preview is the SVG file itself.

A one-colour flag flying from a short pole with a ball on top. The pole joins the union and every stripe, so the whole design cuts and lifts as a single piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size96 × 100 mm (3.8 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut51: 1 outer edge and 50 cut-outs
Cut length1,822 mm at this size
Narrowest part1.1 mm at this size
Nodes623 curve and line segments

Measured from the file. PNG: 1,931 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.96 × 1 in (24 × 25 mm)0.28 mm463 mm100Too fine for most machines
1.93 × 2 in (49 × 51 mm)0.56 mm926 mm25Fine detail: vinyl and paper only, weed with care
2.89 × 3 in (73 × 76 mm)0.84 mm1,388 mm9Fine detail: vinyl and paper only, weed with care
3.86 × 4 in (98 × 102 mm)1.1 mm1,851 mm6Vinyl, card and thin sheet
5.78 × 6 in (147 × 152 mm)1.7 mm2,777 mm2Vinyl, card and thin sheet
7.71 × 8 in (196 × 203 mm)2.2 mm3,702 mm1Vinyl, card and thin sheet
11.57 × 12 in (294 × 305 mm)3.4 mm5,553 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More American flag SVG files

← Waving American flag in three layers All 14 American flags Distressed American flag →