Free American flag SVG

Tattered American flag SVG

Tattered American flag. The preview is the SVG file itself.

A flag that has flown through hard weather: the fly end is whipped to rags, each stripe splitting into strands that stream out to different lengths, with rips running back along the weave.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 59 mm (3.94 × 2.32 in), scales to any size
Pieces	4 separate pieces
Outlines to cut	54: 4 outer edges and 50 cut-outs
Cut length	1,727 mm at this size
Narrowest part	1.3 mm at this size
Nodes	740 curve and line segments

Measured from the file. PNG: 2,000 × 1,210 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.59 in (25 × 15 mm)	0.33 mm	439 mm	150	Too fine for most machines
2 × 1.18 in (51 × 30 mm)	0.66 mm	877 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.77 in (76 × 45 mm)	0.99 mm	1,316 mm	18	Fine detail: vinyl and paper only, weed with care
4 × 2.36 in (102 × 60 mm)	1.3 mm	1,755 mm	8	Vinyl, card and thin sheet
6 × 3.53 in (152 × 90 mm)	2 mm	2,632 mm	3	Vinyl, card and thin sheet
8 × 4.71 in (203 × 120 mm)	2.6 mm	3,509 mm	2	Vinyl, card and thin sheet
12 × 7.07 in (305 × 180 mm)	4 mm	5,264 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More American flag SVG files

← Distressed American flag All 14 American flags Heart-shaped American flag →