Free American flag SVG

Fifty stars of the American flag SVG

Fifty stars of the American flag. The preview is the SVG file itself.

The fifty stars on their own as loose pieces, in the nine rows of six and five that the flag uses. Each is about 9 mm across. Cut them in white to lay over a painted blue field of 110 by 78 mm.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 70 mm (3.94 × 2.77 in), scales to any size
Pieces	50 separate pieces
Outlines to cut	50 outlines
Cut length	1,617 mm at this size
Narrowest part	2.8 mm at this size
Nodes	500 curve and line segments

Measured from the file. PNG: 2,000 × 1,429 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.7 in (25 × 18 mm)	0.71 mm	411 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.41 in (51 × 36 mm)	1.4 mm	821 mm	35	Vinyl, card and thin sheet
3 × 2.11 in (76 × 54 mm)	2.1 mm	1,232 mm	15	Vinyl, card and thin sheet
4 × 2.81 in (102 × 71 mm)	2.8 mm	1,643 mm	8	Vinyl, card and thin sheet
6 × 4.22 in (152 × 107 mm)	4.3 mm	2,464 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.62 in (203 × 143 mm)	5.7 mm	3,286 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.44 in (305 × 214 mm)	8.5 mm	4,929 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More American flag SVG files

← American flag union with fifty stars All 14 American flags Betsy Ross American flag with thirteen stars →