Free alligator SVG

Alligator mouth open wide SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Alligator mouth open wide, as a solid black shape
Alligator mouth open wide. The preview is the SVG file itself.

An alligator head with the jaws thrown open as far as they go, twelve teeth above and eleven below. The gap between the jaws is open, so it can bite the edge of a name or a number.

What is in the file

Size100 × 69 mm (3.94 × 2.71 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length635 mm at this size
Narrowest part1.3 mm at this size
Nodes255 curve and line segments
Also found asGator mouth SVG

Measured from the file. PNG: 2,000 × 1,400 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.69 in (25 × 17 mm)0.33 mm161 mm130Too fine for most machines
2 × 1.38 in (51 × 35 mm)0.66 mm323 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.06 in (76 × 52 mm)0.99 mm484 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.75 in (102 × 70 mm)1.3 mm645 mm8Vinyl, card and thin sheet
6 × 4.13 in (152 × 105 mm)2 mm968 mm2Vinyl, card and thin sheet
8 × 5.5 in (203 × 140 mm)2.6 mm1,290 mm2Vinyl, card and thin sheet
12 × 8.26 in (305 × 210 mm)4 mm1,935 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More alligator SVG files

← Alligator head All 12 alligators Cute cartoon alligator →