Free alligator SVG

Alligator standing and waving SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Alligator standing and waving, as a solid black shape
Alligator standing and waving. The preview is the SVG file itself.

A friendly alligator up on its hind legs, one hand raised in a wave, with a striped tummy, a toothy smile and its tail curled round behind. For classroom doors and see-you-later cards.

What is in the file

Size88 × 100 mm (3.44 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length731 mm at this size
Narrowest part1.2 mm at this size
Nodes327 curve and line segments

Measured from the file. PNG: 1,760 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.88 × 1 in (22 × 25 mm)0.3 mm186 mm110Too fine for most machines
1.75 × 2 in (44 × 51 mm)0.61 mm371 mm30Fine detail: vinyl and paper only, weed with care
2.63 × 3 in (67 × 76 mm)0.91 mm557 mm12Fine detail: vinyl and paper only, weed with care
3.5 × 4 in (89 × 102 mm)1.2 mm743 mm6Vinyl, card and thin sheet
5.25 × 6 in (133 × 152 mm)1.8 mm1,114 mm2Vinyl, card and thin sheet
7 × 8 in (178 × 203 mm)2.4 mm1,485 mm1Vinyl, card and thin sheet
10.5 × 12 in (267 × 305 mm)3.7 mm2,228 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More alligator SVG files

← Cute cartoon alligator All 12 alligators Alligator lurking in the swamp →