Free alligator SVG

Alligator outline SVG

Alligator outline, drawn as a line — Alligator outline. The preview is the SVG file itself.

The alligator in profile as one even line, with its eye as a ring and the zigzag of the teeth drawn in. For colouring pages, foil, engraving and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 28 mm (3.94 × 1.11 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	651 mm at this size
Narrowest part	1.7 mm at this size
Nodes	442 curve and line segments

Measured from the file. PNG: 2,000 × 621 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.28 in (25 × 7 mm)	0.43 mm	165 mm	250	Too fine for most machines
2 × 0.57 in (51 × 14 mm)	0.86 mm	331 mm	75	Fine detail: vinyl and paper only, weed with care
3 × 0.85 in (76 × 22 mm)	1.3 mm	496 mm	33	Vinyl, card and thin sheet
4 × 1.13 in (102 × 29 mm)	1.7 mm	661 mm	18	Vinyl, card and thin sheet
6 × 1.7 in (152 × 43 mm)	2.6 mm	992 mm	6	Vinyl, card and thin sheet
8 × 2.26 in (203 × 58 mm)	3.5 mm	1,323 mm	4	Any material, including 3 mm wood and acrylic
12 × 3.4 in (305 × 86 mm)	5.2 mm	1,984 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More alligator SVG files

← Alligator skin pattern panel All 12 alligators Alligator silhouette →